By Celie Alexandre. Hardwood Flooring. Published at Friday, May 17th, 2019 - 12:31:53 PM.
Because wood wicks water, as soon as you create a dry spot, the dry spot will start to pull in moisture from the wet wood around it. This greatly increases the rate of drying the floor over not moving the fans around. Many hardwood floors are installed on a ”bed” that creates an air gap under the wood slats. If this is the case for your floors, try to create a funnel with a piece of plastic or canvas and force air underneath the floors along any cracks you can find. Use duct tape to tape the funnel to the fan, and an office stapler to staple it over the crack you want to dry out. Take your time, failure to let the floors dry completely out will set up conditions for mold to grow.
For most people the number one concern for flooring isn't the price of purchase but more about the cost of its maintenance. The cost of preserving a solid floor over engineered hardwood flooring equates to a combination of time, labor and money. Solid hardwood flooring needs special care to keep their luster and appearance. Natural wood scratches, fades with age and is prone to warping and even mold should it be exposed to water and moisture for extended periods. After a few years, when the natural wood has weathered a bit, it will be necessary to have the floors resurfaced. This usually involves sanding the wood surface and then re-staining. Unfortunately natural solid wood floors, because of environmental regulations, can't be layered with a coat of polyurethane which could protect it from scratches. Engineered floors is pre-coated which makes it more resistant to scratches and provides for greater longevity. Because engineered flooring is still made with real natural wood, it can be resurfaced if it becomes deeply scratched and its' construction allows it to be used in more highly trafficked areas that may be susceptible to moisture and heat like the kitchen or bathroom. Unlike natural hardwood, engineered flooring would warp or cup when exposed to these elements. This type of flooring is constructed so that their inner core is laid in opposite directions making it immune to atmospheric assaults that would normally cause it to enlarge or shrink creating all kinds of problems.
If you want to install Bruce hardwood flooring in areas where there will be lots of traffic, the Dura Lustre Plus finish will allow you to do this without any worries. Bruce offers commercial finishes for its hardwood floors, but it doesn't recommend using mats in doorways or in front of the kitchen sink. Bruce does not recommend that you wax Bruce wood floorings. To keep the natural shine of Bruce hardwood flooring all you have to do is wash it up with a water based cleaner for hardwood floors and give it an occasional buffing.
What does the stain/finish look like? Many large manufactures will finish all different woods at the same time without making adjustments for each wood because each time they make adjustments it effects the production. The fact is, each wood needs to be finished differently to achieve the nicest stain/finish. Oak requires more finish to ”fill in” the grain or else it will appear very pitted which is not something desirable in an oak floor. You want to be able to hold a piece up to the light and see a perfect smooth finish. Maple requires more brushing than oak so the stain can penetrate into the wood and not appear ”blotchy”. Maple is a beautiful wood and with the proper staining you can really bring out features such as Birdseye and tiger tail. If not stained properly these features are hidden.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.