By Gaspar Alves. Hardwood Flooring. Published at Saturday, May 18th, 2019 - 12:37:28 PM.
Ultraviolent rays of the sun exposed to hardwood surfaces for long durations, fade and dry-out, crack and cut wood flooring material at accelerated rates. Direct rays of the sun often produce extreme temperature build-up on hardwood flooring material surfaces not blocked by modern advanced engineered glass of today's windows. Closing of drapes to protect wood material contradicts the original intent of installing such flooring material, to reflect light in an otherwise dull and dark room. Adequate application of an approved wax, protects the top and under-lying surfaces, blocking all harmful expose to sunlight, maintaining and protecting the flooring surface with an coating of the top layer continuing the warmth and relaxing nature that hardwood floors provide to any interior room.
Although the nail down method of installing hardwood floor panels is pretty simple, it should still be done carefully as the hardwood floor has to endure for many years in whatever form you complete it. All of the furniture and obstacles that can be removed from the room should be removed while you install your hardwood floor panels. This is true even if it requires manual dismantling and reassembly. For those fixtures build into the floor of the room, you'll just have to panel around them. It's not the easiest way to go, but you have to do what you have to do to get your hardwood floor installed. If you have door sills, an old hardwood floor, baseboards, or carpet, remove them before you begin as well. If the surface beneath where you will be flooring is cement or any other lumpy material, use a felt floor liner to cover this surface. Then install a plywood sub-floor over it. Once laid, you should be ready to begin installing the hardwood floor.
For most people the number one concern for flooring isn't the price of purchase but more about the cost of its maintenance. The cost of preserving a solid floor over engineered hardwood flooring equates to a combination of time, labor and money. Solid hardwood flooring needs special care to keep their luster and appearance. Natural wood scratches, fades with age and is prone to warping and even mold should it be exposed to water and moisture for extended periods. After a few years, when the natural wood has weathered a bit, it will be necessary to have the floors resurfaced. This usually involves sanding the wood surface and then re-staining. Unfortunately natural solid wood floors, because of environmental regulations, can't be layered with a coat of polyurethane which could protect it from scratches. Engineered floors is pre-coated which makes it more resistant to scratches and provides for greater longevity. Because engineered flooring is still made with real natural wood, it can be resurfaced if it becomes deeply scratched and its' construction allows it to be used in more highly trafficked areas that may be susceptible to moisture and heat like the kitchen or bathroom. Unlike natural hardwood, engineered flooring would warp or cup when exposed to these elements. This type of flooring is constructed so that their inner core is laid in opposite directions making it immune to atmospheric assaults that would normally cause it to enlarge or shrink creating all kinds of problems.
What does the supplier recommend for acclimation? I know you must have heard someone say ”the flooring must sit in your home for two weeks prior to installation”. This is a very general statement and in most cases will do more harm than good for your hardwood floor. If you did this in a new home and it sat in the home while they were drywalling, painting, the wood would be so damp by the time you installed it that you would just be asking for trouble. The fact is a new home will have 1000 to 2000 gallons of water that will be oozing out of the home the first two years. If your flooring is sitting in the home before it is installed it will absorb all of that moisture. If you are having the flooring sit in your home you will want to make sure it is stored in normal living conditions to avoid it from drying out too much or picking up too much moisture. In some cases, a seasonal dwelling, you may want to have the hardwood flooring absorb the moisture before it is installed. If the home is always a high humidity environment then you want the wood to pick up moisture so it can be normal living conditions for that particular environment. You want to have a hygrometer to measure the humidity in your home before the installation and monitor your humidity after to ensure your home is in the proper humidity range to avoid issues with your flooring.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.