Published at Thursday, May 23rd, 2019 - 23:46:21 PM. Hardwood Flooring. By Nann Jullien.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
What is the structural and surface warranty? This is a very important part of choosing a hardwood floor. Anyone can put a 25, 30, or 40 year warranty on the finish of their product but the real question is; will they stand behind their warranty. Many large hardwood flooring manufacturers have warranties that are up to ten pages. When you read through the entire warranty and all of the exclusions it really gives the client the impression that there is actually no warranty at all. The problem is most consumers don't take the time to read the warranty and are shocked when they find out the issue they are having with the flooring is one of the ”exclusions”. Most warranties will say that there is an industry standard of 5% margin for error which means that when your entire floor is complete the manufacturer is allowed to have 5% of the boards defective. That means a finished floor of 1000 square feet would be allowed roughly 100 boards with any kind of defect.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.