By Chantay Bonnin. Hardwood Flooring. Published at Saturday, May 18th, 2019 - 12:22:31 PM.
The most prominent element that makes hardwood become unclean is dirt and grit. If these elements are not properly removed, they can cause scratch or marks on your flooring. To clean your hardwood flooring is as easy as sweeping and dusting or a regular basis. Daily sweeping is not also advisable because they can cause damage to the hardwood. To sweep the floor at least once a week is the best thing that can be done except of course when there are especial occasions that need proper cleaning. It is better to use vacuum cleaners compared to sweeping and scrubbing. If the flooring that you have in your home is made with shining or glossy finish, you can use a damp mop because the hardwood is protected with either oil or wax. When using a damp mop, make sure that there is no water spills being drifted on the floor. Some people also make use of neutral pH hardwood floor cleaner while cleaning or mopping the floor.
When a more in-depth cleaning is required, use a cleaning method appropriate to the finish on your floor. If your floor has a glossy finish, it means that polyurethane, or a water-based urethane, or a similar finish has been used to form a protective barrier over the hardwood. If it has a matte finish, it means that the floor is protected with a penetrating seal of oil and/or wax. On neither of these finishes is water an acceptable cleaning agent, but both of them can accept a surface, damp-mop cleaning, which means the mop is not wet but only damp to the touch. You are cleaning only the surface and not using enough water to penetrate even the oiled-and-waxed hardwood. When using a damp mop on oil and waxed hardwood, you can add a little neutral ph hardwood floor cleaner to the water before dipping the mop into it. A floor with a protective glossy barrier can accept a generic hardwood floor cleaner providing it doesn't contain any wax or oil.
Although it is not recommended, you can have Bruce hardwood flooring in the bathroom of your home. This is because hardwood is not conducive to areas of the home where there is excessive moisture. The choice to use unfinished or prefinished Bruce wood flooring is a matter of personal taste. It depends on how much work you want to do to finish the floor yourself or how much time you want to spend on maintenance of the Bruce hardwood floors. There are advantages and disadvantages to both, so you can ask the Bruce experts for advice when you are selecting your hardwood flooring. Prefinished hardwood does have more advantages, such as longer finish warranties, uniform stain application in a factory setting and it is easier to keep clean.
Sometimes, people who have installed Bruce wood flooring in their homes hear popping sounds when they walk across the floors. This is not defect in the Bruce hardwood flooring and is perfectly natural, so there is no cause for alarm. All hardwood goes through a process called patina and it may be caused by an uneven subfloor under the Bruce hardwood floors. If you glue the hardwood planks in place, you do have to make sure that you use the trowels properly when applying the adhesive so that you have a perfectly uniform surface for the hardwood floors.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.