Published at Monday, May 13th, 2019 - 10:09:29 AM. Hardwood Flooring. By Ranier Sauvage.
What is the waste factor of the flooring? The waste factor of the flooring is an important issue as well. If 10-15% waste is what is suggested by the manufacturer than that means you will have to buy that much more to get enough to install your entire floor. The higher the recommended waste factor the lower quality the product. You may find when comparing products for price on may be more than the other but you must factor in the difference in waste to the price. A floor for $6 with 3% waste would cost you $6.18 which would be the same cost as a floor with 10% waste that is $5.62 and the product with 3% waste would definitely be a higher quality product. The bottom line is you shouldn't have to sort the waste out of the boxes; the manufacturers should be taking the waste out at the plant so you are only getting good quality pieces you can install in your floor.
Finishing – Most hardwood floors are sold with some form of factory finish. These consist of protective coats of polyurethane, aluminum oxide, or a combination of both, that are applied to protect the wood from wear and tear. The latest available factory finishes have been formulated to make hardwood flooring more scratch-resistant. In case you purchased unfinished flooring, it will still need to undergo finishing once the floors are installed. However, the quality of the finishing will not be as good as if it were finished in a factory.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.