Published at Thursday, May 23rd, 2019 - 12:35:34 PM. Ceramic Tile. By Pierpont Salle.
If the floor you're covering with ceramic tile flooring is other than concrete, you'll either have to lay concrete first or lay concrete backing boards. The floor in which you'll install your ceramic tile flooring must be as even as possible. If it's not, you'll have to even it out first. Repair all holes and cracks in the floor and clean it thoroughly prior to beginning work. Once the floor is prepared and dried, you can start laying your ceramic tile flooring. It is best to lay the tile in pre-separated sections. Divide the floor into four sections. You can use grout as a line separator. Then, for each section, use a notched trowel to spread the mortar. Hold the trowel at a 45 degree angle so that it creates notches in the spread. This enables better holding when you set in the tile.
Install the Ceramic Tiles – Start with the center and move outwards with each ceramic tile. Use thin set mortar or tile adhesive to set the tiles, make sure that the bond between the tile and the sub-floor sets by applying pressure on each tile. After the tiles have set, complete the process by applying the grout. Remember that the grout must be of the same color as the tiles you have chosen. Remember that each step requires twenty-four hours to set and dry before allowing yourself to proceed to the next step of your ceramic tile flooring installation.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.