Published at Thursday, May 23rd, 2019 - 14:32:25 PM. Hardwood Flooring. By Denisse Tardy.
The next product in the Impressions hardwood flooring line is a top selling 1/2” thick engineered hardwood called the Salem Series. The Salem series features a Perma-Finish Commercial Grade Water Based finish and is stocked with only Prime Select Grade oak products. The Salem Series has Red Oak & Brazilian Cherry as species available to the name and can be installed below, above & on grade. The Salem Series is an engineered hardwood floor with a hardwood base panel & 2mm thick sawn face wear layer for Oaks & 1.4mm for the Brazilian cherry. The Perma-Finish, being that it is a water base, allows the true coloring of the grain to show through and shine and is added protection against scratching. This product features boards of 1'-4' and an average board length of 31” making it a longer plank than most engineered wood flooring on today's market. The edges on this product are a 4-sided micro bevel and prevent chipping at the edges while defining the edge of each board. This environmentally friendly hardwood leaves a smaller carbon footprint on the planet due to less waste & less use of domestic trees in the creation of this floor. This is a very thick engineered hardwood and may be sanded and recoated many times over the life of this floor and will last many years. This product is only available in 3” widths for both the Oaks & Brazilian cherry floor. This product can be easily installed either by Glue, Nail or Staple down. The Brazilian Cherry is Lacey Act Compliant being harvested from forests that are used solely for hardwood flooring purposes.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.