By Derrall Auvray. Hardwood Flooring. Published at Thursday, May 16th, 2019 - 00:43:32 AM.
Versatility – Wood floors can be stained and refinished to match any decor and any lifestyle. Hardwood floor refinishing experts can sand and stain wood floors to achieve hundreds of looks, from cherry to mahogany and beyond. Additionally, your local hardwood floor contractors will have professional wood flooring sales and service representatives on duty to help you design custom wood flooring! There are literally hundreds of wood inlay types and patterns to choose from. So if you're going for a rustic look in your living room or an elegant atmosphere in your dining room, your local hardwood experts can help! Many can even do historical renovations.
Even with Bruce hardwood flooring, you will see variations in the wood in each plank. This is what will give your hardwood floors the unique appearance that you want to achieve. This variation exists in all qualities of Bruce hardwood floors because no two boards are the same. You do have to be careful even with hardwood even though it is solid. If you place furniture with sharp edges on the flooring it will dent the hardwood. Bruce wood flooring also goes through a natural aging process so if you have an area covered with a rug, when you move it the floor underneath will be lighter in color. It is recommended that you do move rugs from time to time to prevent this discoloration from occurring.
Although the nail down method of installing hardwood floor panels is pretty simple, it should still be done carefully as the hardwood floor has to endure for many years in whatever form you complete it. All of the furniture and obstacles that can be removed from the room should be removed while you install your hardwood floor panels. This is true even if it requires manual dismantling and reassembly. For those fixtures build into the floor of the room, you'll just have to panel around them. It's not the easiest way to go, but you have to do what you have to do to get your hardwood floor installed. If you have door sills, an old hardwood floor, baseboards, or carpet, remove them before you begin as well. If the surface beneath where you will be flooring is cement or any other lumpy material, use a felt floor liner to cover this surface. Then install a plywood sub-floor over it. Once laid, you should be ready to begin installing the hardwood floor.
If you want to install Bruce hardwood flooring in areas where there will be lots of traffic, the Dura Lustre Plus finish will allow you to do this without any worries. Bruce offers commercial finishes for its hardwood floors, but it doesn't recommend using mats in doorways or in front of the kitchen sink. Bruce does not recommend that you wax Bruce wood floorings. To keep the natural shine of Bruce hardwood flooring all you have to do is wash it up with a water based cleaner for hardwood floors and give it an occasional buffing.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.