Published at Wednesday, May 22nd, 2019 - 04:44:49 AM. Ceramic Tile. By Francois Martinez.
The first step in the removal of ceramic tile is to take out the trim covering the edges of the tiles. Next, scrape out the grout found on the perimeter of the tiles. Caulking on the vertical corners should also be properly scraped out. For removing these elements, equipments such as sharp utility knife, razor blade, and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk, tapping can be done on the tiles to check whether any of the tiles is loose.
Prepare the Sub-Floor for the Tiling Process – After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.