By Macy Derrien. Hardwood Flooring. Published at Thursday, May 23rd, 2019 - 23:22:12 PM.
What does the supplier recommend for acclimation? I know you must have heard someone say ”the flooring must sit in your home for two weeks prior to installation”. This is a very general statement and in most cases will do more harm than good for your hardwood floor. If you did this in a new home and it sat in the home while they were drywalling, painting, the wood would be so damp by the time you installed it that you would just be asking for trouble. The fact is a new home will have 1000 to 2000 gallons of water that will be oozing out of the home the first two years. If your flooring is sitting in the home before it is installed it will absorb all of that moisture. If you are having the flooring sit in your home you will want to make sure it is stored in normal living conditions to avoid it from drying out too much or picking up too much moisture. In some cases, a seasonal dwelling, you may want to have the hardwood flooring absorb the moisture before it is installed. If the home is always a high humidity environment then you want the wood to pick up moisture so it can be normal living conditions for that particular environment. You want to have a hygrometer to measure the humidity in your home before the installation and monitor your humidity after to ensure your home is in the proper humidity range to avoid issues with your flooring.
”Solid” hardwood flooring is traditionally cut from a log in an unfinished plank form with tongue and groove milled on all sides. Ranging from 5/16” to ¾” in thickness, ”solid” floors are typically available in various widths and lengths. Due to the sensitivity of natural ”solid” hardwood from humidity and moisture, natural solid wood floors are normally installed at or above ground level. The natural beauty of wood grains found in solid hardwoods is both appealing and alluring with finishes that may be completed upon installation in the home or factory finished with a pre-determined choice of unlimited finishes to select from. ”Solid” hardwood flooring is as one may expect the most expensive of all wood floor selections. It is not uncommon for ”solid” hardwood floors to exceed two to three times the cost over other floor selections and in most cases is out of reach of those on restricted budget guidelines. Available in a variety of North American wood species, ”solid” hardwood floors are noted for durability and overall beauty that will last a lifetime.
To date, there are two basic types of hardwood flooring, solid wood and engineered wood. With many variations of engineered wood floors available, choosing the correct wood floor can be at best, confusing and frustrating. Whereas the terminology associated with ”hardwood”, often results in purchasing a floor that does not fit allotted budget guidelines or installation limitations to which the floor is intended, not all hardwood floors are in-fact; ”natural hardwood”. Purchasing and installation of a wood floor not designed for a specific purpose will often lead to replacement and loss of expenditures of funds previously applied.
Hardwood floors, regardless of finish or manufacturer's specifications require periodic maintenance including the application of an approved wax/polish designed for a particular wood flooring material species. Hardwood floors left unprotected will in time, fade, discolor revealing signs of visible deterioration under normal daily use. With proper care and maintenance of all hardwood material, the original beauty and luster can be maintained with reflections of pride in your home while protecting your investment.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.