Published at Wednesday, May 22nd, 2019 - 23:05:13 PM. Hardwood Flooring. By Tyson Villard.
As mentioned earlier, installing hardwood floors is a significant investment which therefore requires proper maintenance to protect your investment and enjoy it for as long as possible. With that in mind, below are some helpful tips on hardwood flooring: Make sure you know your specific type of flooring and finish. You should also be sure to follow the specific manufacturer's instructions for cleaning and general maintenance. Do some research on how to care for your particular kind of finish. For example, paste wax should never be used on polyurethane finish. Sweeping hardwood floors with a soft broom on a regular basis naturally buffs the surface, therefore protecting it from scratches. Another obvious advantage of this is that it will keep the floor clean. Where possible, leave shoes at the door to avoid dragging extra dirt and grime onto the floor. If not, consider using rugs in high traffic areas such as hallways and entrances to keep feet clean. Remove any solid materials from the floor such as sand, grit and dirt among others. These materials are abrasive and can dull and even scratch the floor's finish. Use a dry towel to wipe spills and other messes from wood floors. Oils soaps should NEVER be used on hardwood floors. These oils will eventually build up and will dull the surface of the floor. In addition to this, it will make it difficult to refinish the floor whenever needed. Use a vacuum with a bare floor attachment. Such a vacuum easily removes dirt and dust without scratching or otherwise damaging the floor. Do not drag furniture across the floor when moving it. Instead, lift the furniture when moving it. Where dragging is inevitable, invest in a set of slip-mats. Where these are not available, lids from plastic food containers work just as well. Use only cleaners that have specifically been manufactured for use on hardwood floors. Do not substitute with linoleum, laminate or tile cleaners as these can cause the floor to become extra slippery. Use as little water as possible when cleaning wood floors. Wet spots should also be immediately wiped up after cleaning.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.