By Creissant Barbot. Hardwood Flooring. Published at Thursday, May 23rd, 2019 - 18:49:12 PM.
Natural Variety in Color – Since the Asian walnut hardwood exhibits a naturally wide variety in color, it's better to request for two sample boards so you can envision how the finished floors will look like. Some individuals expect a certain level of uniformity in their flooring, while others enjoy the distinctive color gradients that Asian walnut hardwood flooring usually exhibit. For a more comprehensive peek at how the finished product will appear, you can try buying a box of boards and go about arranging them on your floor. This way, you should be more or less sure on whether or not you will be using Asia walnut hardwood for your home. If you decided otherwise, you will have only spent a fraction of the actual cost of flooring for the entire project.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
Hardwood floors, regardless of finish or manufacturer's specifications require periodic maintenance including the application of an approved wax/polish designed for a particular wood flooring material species. Hardwood floors left unprotected will in time, fade, discolor revealing signs of visible deterioration under normal daily use. With proper care and maintenance of all hardwood material, the original beauty and luster can be maintained with reflections of pride in your home while protecting your investment.
What is the waste factor of the flooring? The waste factor of the flooring is an important issue as well. If 10-15% waste is what is suggested by the manufacturer than that means you will have to buy that much more to get enough to install your entire floor. The higher the recommended waste factor the lower quality the product. You may find when comparing products for price on may be more than the other but you must factor in the difference in waste to the price. A floor for $6 with 3% waste would cost you $6.18 which would be the same cost as a floor with 10% waste that is $5.62 and the product with 3% waste would definitely be a higher quality product. The bottom line is you shouldn't have to sort the waste out of the boxes; the manufacturers should be taking the waste out at the plant so you are only getting good quality pieces you can install in your floor.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.