Published at Sunday, May 12th, 2019 - 10:57:05 AM. Ceramic Tile. By Darcie Cormier.
Prepare the Sub-Floor for the Tiling Process – After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
If the floor you're covering with ceramic tile flooring is other than concrete, you'll either have to lay concrete first or lay concrete backing boards. The floor in which you'll install your ceramic tile flooring must be as even as possible. If it's not, you'll have to even it out first. Repair all holes and cracks in the floor and clean it thoroughly prior to beginning work. Once the floor is prepared and dried, you can start laying your ceramic tile flooring. It is best to lay the tile in pre-separated sections. Divide the floor into four sections. You can use grout as a line separator. Then, for each section, use a notched trowel to spread the mortar. Hold the trowel at a 45 degree angle so that it creates notches in the spread. This enables better holding when you set in the tile.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.