Published at Sunday, May 12th, 2019 - 10:22:20 AM. Laminate Flooring. By Natuche Potier.
measuring for your laminate floor – In order to purchase the correct amount of laminate flooring, you'll need to find out the total squared area that you require covered. Thankfully laminate flooring comes in packs (which vary in the quantity of boards they contain depending on the type you purchase), which indicate both the individual board size of the panels, as well as the overall area covered per pack. Therefore, to calculate how many packs of laminate flooring you'll need for your project you'll need to first multiply the width by the depth of your room. This will give you your squared area size. If your room is not completely square or rectangular, simply divide your space up into smaller areas that can be squared off. Now take your new area size and divide it by the area covered as indicated on the packs of your chosen type of laminate flooring. This will now give you a figure which is equal to the number of packs you'll need to purchase to cover your area. It's important to purchase 10% extra boards than you'll need just in case you make any mistakes, or there's been any miscalculations. This will avoid the project being potentially held up, or a situation where you realise you need more boards, but they're out of stock or discontinued.
laying laminate flooring – Now you come to actually laying the laminate flooring itself. Following the layout you already worked out in Step 3, begin laying your laminate flooring remembering to keep the spacers in place between the laminate flooring and the skirting board to allow for expansion. If you're using tongue and groove laminate flooring, simply introduce each new board at a 45 degree angle to the previous one, and gently lower the new board in place. You should feel the tongue click into the groove, and the boards should sit flush with each other. It is advisable to use a pulling bar and a beating block to help encourage each board into place after you've laid it. Pulling bars are used when you reach the end of a row and don't have sufficient space to use a beating block. When you come to cut your end-of-row boards, the easiest way to do this is to lay the board in position where you intend to place it, ad mark on either side when a cut will need to be made. Using your set square, join the marks up to give you a nice straight cutting line. Using your laminate cutter, or the saw you have available, cut your laminate board, first checking which side of the board should be facing upward to minimise damage (this will depend on the type of saw you're using). Do not forget to wear safety protection while you do this.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.