Published at Tuesday, May 14th, 2019 - 07:19:59 AM. Laminate Flooring. By Cherrelle Clement.
Cleaning up dust or loose dirt is easily done with a dust mop or vacuum; for more in-depth cleaning, use a damp mop or damp towel, but don't saturate or allow water to stand on the floor. Do not use abrasives or scouring powder, polishes, or waxes. Clean the floor before starting the you start the planned work. Designers recommend laminate for an upscale look without an upscale cost. Homeowners can make a house a home, stick to a budget AND get a warm wood look. Designed with a tough and durable wear layer, it is much stronger than most installed solid hardwood flooring, vinyl's, and carpets. It stands up much better to dents and scratches that the softer surface of solid hardwood floors, and is a much better surface to install if you have heavy foot traffic, kids, or household pets.
laying laminate flooring – Now you come to actually laying the laminate flooring itself. Following the layout you already worked out in Step 3, begin laying your laminate flooring remembering to keep the spacers in place between the laminate flooring and the skirting board to allow for expansion. If you're using tongue and groove laminate flooring, simply introduce each new board at a 45 degree angle to the previous one, and gently lower the new board in place. You should feel the tongue click into the groove, and the boards should sit flush with each other. It is advisable to use a pulling bar and a beating block to help encourage each board into place after you've laid it. Pulling bars are used when you reach the end of a row and don't have sufficient space to use a beating block. When you come to cut your end-of-row boards, the easiest way to do this is to lay the board in position where you intend to place it, ad mark on either side when a cut will need to be made. Using your set square, join the marks up to give you a nice straight cutting line. Using your laminate cutter, or the saw you have available, cut your laminate board, first checking which side of the board should be facing upward to minimise damage (this will depend on the type of saw you're using). Do not forget to wear safety protection while you do this.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.