Published at Saturday, May 11th, 2019 - 08:33:41 AM. Ceramic Tile. By Allaire Schmidt.
Prepare the Sub-Floor for the Tiling Process – After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
If a loose tile is located, then the rest of the tiles should come off easily. For removing the first tile, gently apply a thin putty knife under the edge of the tile. To facilitate the insertion of knife under the tile, a hammer can be used to tap the knife's handle. When the knife or blade is halfway beneath the tile, it should be exerted gradually. Likewise, remove all the ceramic tiles. If done carefully and properly, ceramic tiles can be salvaged to an extent. But, before using removed ceramic tiles again, their back should be cleaned with an adhesive remover.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.