By Derrill Lecoeur. Hardwood Flooring. Published at Thursday, May 16th, 2019 - 06:25:12 AM.
For centuries, hardwood floors have been gracing magnificent homes throughout the Deep South to elegant homes of kings and queens. Known for durability and overall beauty, hardwood floors have gained in popularity throughout the years, rapidly becoming the choice in floor coverings over once considered traditionally installed carpet due to the low maintenance of hardwood floors and the beauty that lies within. With numerous selections of hardwood floors available, consumers are often confused about the composition of wood floors resulting in purchasing a floor that does not fit into an allotted budget or installation not designed for the intended use.
To date, there are two basic types of hardwood flooring, solid wood and engineered wood. With many variations of engineered wood floors available, choosing the correct wood floor can be at best, confusing and frustrating. Whereas the terminology associated with ”hardwood”, often results in purchasing a floor that does not fit allotted budget guidelines or installation limitations to which the floor is intended, not all hardwood floors are in-fact; ”natural hardwood”. Purchasing and installation of a wood floor not designed for a specific purpose will often lead to replacement and loss of expenditures of funds previously applied.
Although the nail down method of installing hardwood floor panels is pretty simple, it should still be done carefully as the hardwood floor has to endure for many years in whatever form you complete it. All of the furniture and obstacles that can be removed from the room should be removed while you install your hardwood floor panels. This is true even if it requires manual dismantling and reassembly. For those fixtures build into the floor of the room, you'll just have to panel around them. It's not the easiest way to go, but you have to do what you have to do to get your hardwood floor installed. If you have door sills, an old hardwood floor, baseboards, or carpet, remove them before you begin as well. If the surface beneath where you will be flooring is cement or any other lumpy material, use a felt floor liner to cover this surface. Then install a plywood sub-floor over it. Once laid, you should be ready to begin installing the hardwood floor.
Because wood wicks water, as soon as you create a dry spot, the dry spot will start to pull in moisture from the wet wood around it. This greatly increases the rate of drying the floor over not moving the fans around. Many hardwood floors are installed on a ”bed” that creates an air gap under the wood slats. If this is the case for your floors, try to create a funnel with a piece of plastic or canvas and force air underneath the floors along any cracks you can find. Use duct tape to tape the funnel to the fan, and an office stapler to staple it over the crack you want to dry out. Take your time, failure to let the floors dry completely out will set up conditions for mold to grow.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.