Published at Tuesday, May 21st, 2019 - 14:08:30 PM. Hardwood Flooring. By Tyson Villard.
Because wood wicks water, as soon as you create a dry spot, the dry spot will start to pull in moisture from the wet wood around it. This greatly increases the rate of drying the floor over not moving the fans around. Many hardwood floors are installed on a ”bed” that creates an air gap under the wood slats. If this is the case for your floors, try to create a funnel with a piece of plastic or canvas and force air underneath the floors along any cracks you can find. Use duct tape to tape the funnel to the fan, and an office stapler to staple it over the crack you want to dry out. Take your time, failure to let the floors dry completely out will set up conditions for mold to grow.
If you want to install Bruce hardwood flooring in areas where there will be lots of traffic, the Dura Lustre Plus finish will allow you to do this without any worries. Bruce offers commercial finishes for its hardwood floors, but it doesn't recommend using mats in doorways or in front of the kitchen sink. Bruce does not recommend that you wax Bruce wood floorings. To keep the natural shine of Bruce hardwood flooring all you have to do is wash it up with a water based cleaner for hardwood floors and give it an occasional buffing.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.