By Lucrece Le Bris. Hardwood Flooring. Published at Tuesday, May 21st, 2019 - 19:43:17 PM.
Cost for engineered hardwood flooring is based on the thickness of the substrate or layers of plywood material that comprises the overall composition and the selection of the finished top layer. With thicknesses varying from ¼” to 9/16”, with the most common thickness of 3/8” to ½” selected, engineered wood floors average $3.25 per square foot depending on thickness and selection of finished surface, professionally installed. Significant savings are noticeable when installed by the homeowner, reducing overall costs to approximately $2.00 per square foot which can add up to significant savings depending on the overall size of the room. With basic mechanical ability and use of standard installation tools, a hardwood floor can easily be easily installed over a weekend with satisfaction that boost even the most sublime egos. Regardless of selection, natural hardwood or engineered wood floors offer intrinsic value to any home with active lifestyles increasing the overall value of the home substantially. Hardwood floors add elegance and beauty to any interior room of the home with a high traffic pattern requiring less maintenance while maintaining the overall beauty within.
In the process of how to install hardwood floors, cleaning up is important and overlooked enough to warrant its own follow-up section. But unlike other nail down method guides on how to install hardwood floor panels, we want to make sure you understand this step. Cleaning up is important because there are little wood chips and saw dust everywhere after the typical hardwood floor installation. Use your broom and dust pan to pick up any debris on the floor. These particles, if walked on and rubbed on by furniture, can make your brand new floor look like a scratched up old floor pretty quickly. Unless you went beyond the instructions on how to install hardwood floors and used glue on your hardwood panels, there's no need to get your floor wet before it has had a chance to settle. This is because you don't want it to swell before you've moved the furniture back in and given it a couple days to get itself in its final arrangement.
In order for the investment in new hardwood floors to last a lifetime, it is crucial to understand the differences in solid and engineered hardwood flooring. Several factors must be considered to select the best option for each unique situation. Homeowners can feel good about choosing their hardwood flooring if they learn a few basics first. Solid Hardwood Flooring – Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home's decor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
Some owners (who apparently have an abundance of time on their hands) opt for dog booties when their dog is indoors. This sounds like one of the more tedious methods of dealing with dogs tearing into hardwood flooring. Another solution is dog nail covers. These are plastic caps that you can buy for your dog's nails that stay in place with an included adhesive. They can be purchased in a clear color or in other colors, and they stay in place for about 8 weeks. One of the issues that dog owners have cited with these is that sometimes the nail grows within the cap and the cap needs to be cut off. Dog nails aren't dead and nerve-free like human nails are. They have a vein of blood running through them, and if the nail gets too truncated, there could be pain for the dog.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.