Published at Saturday, May 25th, 2019 - 05:19:57 AM. Ceramic Tile. By Delmare Cariou.
The first step in the removal of ceramic tile is to take out the trim covering the edges of the tiles. Next, scrape out the grout found on the perimeter of the tiles. Caulking on the vertical corners should also be properly scraped out. For removing these elements, equipments such as sharp utility knife, razor blade, and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk, tapping can be done on the tiles to check whether any of the tiles is loose.
Though installation of ceramic tile is not a complicated task, it does involve some detailed steps such as preparing tile surface, laying out the wall, applying adhesive or mortar, setting tile, and caulking. Ceramic tile can be installed on any surface such as drywall, plaster, cement block, and even in existing ceramic tile. The surface for the tiles should be flat, smooth, and free of dust and debris. Additionally, if there is any loose paint or crack on the surface, it should be scraped off and patched with some water-proof substance. Laying out the wall is perhaps the most important step in the installation process. It includes determining the level line, planning starting point, and checking whether any irregularity has been caused by fixtures like kitchen cabinets and tubs. The next step is to evenly apply ceramic wall adhesive on the surface using a notch trowel. Pro-mastic and pro-flex platinum are the most commonly used adhesives for ceramic tiles.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.