Published at Tuesday, May 21st, 2019 - 15:13:02 PM. Ceramic Tile. By Blondene Thiebaut.
If the floor you're covering with ceramic tile flooring is other than concrete, you'll either have to lay concrete first or lay concrete backing boards. The floor in which you'll install your ceramic tile flooring must be as even as possible. If it's not, you'll have to even it out first. Repair all holes and cracks in the floor and clean it thoroughly prior to beginning work. Once the floor is prepared and dried, you can start laying your ceramic tile flooring. It is best to lay the tile in pre-separated sections. Divide the floor into four sections. You can use grout as a line separator. Then, for each section, use a notched trowel to spread the mortar. Hold the trowel at a 45 degree angle so that it creates notches in the spread. This enables better holding when you set in the tile.
Maintaining vitrified tiles and ceramic tiles don't go far off from each other. Both have nearly similar ways of maintenance and cleaning. Both vitrified and ceramic doesn't need any special maintenance ritual after installation. Cleaning both types of tiles is also not so difficult. Both can be cleaned using a damp cloth. However, if the going gets tough, the tough gets rougher. In cases that your tiles are really greasy, you could use strong cleaning chemicals such as detergents and bleach. It is safe to use these chemicals on any type of vitrified tiles or ceramic tiles. The non – porous surface of both tiles makes it impossible for molds and mildew to occur. That is why it is perfect for pools, bathrooms and kitchens.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.