Published at Tuesday, May 21st, 2019 - 15:13:25 PM. Ceramic Tile. By Blondene Thiebaut.
After having applied the adhesives, carefully place the tiles one by one on the surface. Equipments such as tile spacers can be used to give adequate space between the tiles. Sometimes, for fixing tiles on the edges cutting may be required. A masonry drill can be used for the cutting purposes. For making curved cuts, micro cutter or wet saw can be used. Before allowing the tiles to settle, they should be leveled using a hammer. When tiles are settled, fill in the gap between the tiles with grout. Seal all grout joint to avoid grout porosity. The final step in ceramic tile installation process is caulking. This is primarily done to prevent water from seeping into bathtub edges or corners of the wall.
The composition of vitrified tiles is homogenous in nature. Ceramic tiles only have a decorative glaze on top of its clay layer. To achieve a glossy look, vitrified tiles are manually polished. Ceramic tiles however bases its beauty to the durability of the glaze applied over it. However, most glazes are not that durable and scratch resistant and over time, it yellows, it cracks and it chips. Both vitrified and ceramic tiles are difficult to stain because of its non – porous properties. However, the grout that places them intact is the one who is more likely to be stained.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.