By Roesia Boulay. Ceramic Tile. Published at Saturday, May 25th, 2019 - 05:40:44 AM.
The composition of vitrified tiles is homogenous in nature. Ceramic tiles only have a decorative glaze on top of its clay layer. To achieve a glossy look, vitrified tiles are manually polished. Ceramic tiles however bases its beauty to the durability of the glaze applied over it. However, most glazes are not that durable and scratch resistant and over time, it yellows, it cracks and it chips. Both vitrified and ceramic tiles are difficult to stain because of its non – porous properties. However, the grout that places them intact is the one who is more likely to be stained.
Measure Everything – The next step of your ceramic tile flooring installation is the accurate measuring of your floor and your tiles. This is necessary for you to be able to calculate exactly how many tiles you will need. You must measure the length and width of the section of floor you are going to tile and also the length and width of each tile. Then you must calculate, using these numbers, exactly how many tiles you are going to use, which will depend on the orientation of each tile as you have decided to place it on the floor, as well. Then you must find the mid-points of the length and the width of the floor you want to carry out your ceramic tile flooring installation process on; connect these midpoints to form a plus across the floor space. The intersection of the two lines of the plus is the center of your floor space; it is here that you must begin your ceramic tile flooring installation.
Before you can begin your ceramic tile flooring installation, you must make sure that the tiles you have chosen are well-suited for the section of the house you are going to use them for. Ceramic tile flooring is resistant to moisture, water spillage and sudden extreme changes in temperature and are usually used in bathrooms or kitchens, and sometimes in other areas of the house as well. Once you have made sure of the section of flooring that you will use ceramic tiling for and also the tiles that you want to use – you are ready to begin.
For ceramic walls in dry areas not subject to much physical contact most any type of tile and glaze is adequate. For wet areas flat tiles, low relief tiles or even high relief tiles can be used so long as they are not in a hazardous place that a body can inadvertently come into contact with them. A large frog leaping out from your shower wall at body height is probably not a good idea. Obviously, porous tiles are not good for wet areas. So long as the tile is vitreous – has been fired to maturity such that the crystalline structure is unified – the tile or glaze is OK, however the joints between the tiles will need to be sealed. Again, the best bet here is a high fired stoneware tile with a dependable glaze.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.