Published at Wednesday, May 22nd, 2019 - 17:00:04 PM. Laminate Flooring. By Bernadette Pelissier.
If you have a wood sub-floor then you will need a belt sander to smooth the surface. You might need to rent a jamb saw if you don't want to purchase one also. The jamb saw will be used to cut the door jamb and other trimmings so you have enough clearance for the flooring. A trowel will be used to smooth the leveling compound. The tools for preparation should cost you less than $100, including the cost for renting the saw. You will need many tools for the installation of the kitchen laminate flooring also. These tools include a backsaw and a miter box for cutting angles in the flooring. A circular saw is for straight cuts with a carbide tipped blade and a saber saw with a laminate blade will be used for cutting curves. You can rent saws from hardware stores if you do not want to purchase them for around $20 to $30 a day. The basic tools you will need for the installation of your laminate flooring in the kitchen will run you under $100.
laying laminate flooring – Now you come to actually laying the laminate flooring itself. Following the layout you already worked out in Step 3, begin laying your laminate flooring remembering to keep the spacers in place between the laminate flooring and the skirting board to allow for expansion. If you're using tongue and groove laminate flooring, simply introduce each new board at a 45 degree angle to the previous one, and gently lower the new board in place. You should feel the tongue click into the groove, and the boards should sit flush with each other. It is advisable to use a pulling bar and a beating block to help encourage each board into place after you've laid it. Pulling bars are used when you reach the end of a row and don't have sufficient space to use a beating block. When you come to cut your end-of-row boards, the easiest way to do this is to lay the board in position where you intend to place it, ad mark on either side when a cut will need to be made. Using your set square, join the marks up to give you a nice straight cutting line. Using your laminate cutter, or the saw you have available, cut your laminate board, first checking which side of the board should be facing upward to minimise damage (this will depend on the type of saw you're using). Do not forget to wear safety protection while you do this.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.