By Taillefer Jolivet. Hardwood Flooring. Published at Saturday, May 18th, 2019 - 19:21:54 PM.
For most people the number one concern for flooring isn't the price of purchase but more about the cost of its maintenance. The cost of preserving a solid floor over engineered hardwood flooring equates to a combination of time, labor and money. Solid hardwood flooring needs special care to keep their luster and appearance. Natural wood scratches, fades with age and is prone to warping and even mold should it be exposed to water and moisture for extended periods. After a few years, when the natural wood has weathered a bit, it will be necessary to have the floors resurfaced. This usually involves sanding the wood surface and then re-staining. Unfortunately natural solid wood floors, because of environmental regulations, can't be layered with a coat of polyurethane which could protect it from scratches. Engineered floors is pre-coated which makes it more resistant to scratches and provides for greater longevity. Because engineered flooring is still made with real natural wood, it can be resurfaced if it becomes deeply scratched and its' construction allows it to be used in more highly trafficked areas that may be susceptible to moisture and heat like the kitchen or bathroom. Unlike natural hardwood, engineered flooring would warp or cup when exposed to these elements. This type of flooring is constructed so that their inner core is laid in opposite directions making it immune to atmospheric assaults that would normally cause it to enlarge or shrink creating all kinds of problems.
The next product in the Impressions hardwood flooring line is a top selling 1/2” thick engineered hardwood called the Salem Series. The Salem series features a Perma-Finish Commercial Grade Water Based finish and is stocked with only Prime Select Grade oak products. The Salem Series has Red Oak & Brazilian Cherry as species available to the name and can be installed below, above & on grade. The Salem Series is an engineered hardwood floor with a hardwood base panel & 2mm thick sawn face wear layer for Oaks & 1.4mm for the Brazilian cherry. The Perma-Finish, being that it is a water base, allows the true coloring of the grain to show through and shine and is added protection against scratching. This product features boards of 1'-4' and an average board length of 31” making it a longer plank than most engineered wood flooring on today's market. The edges on this product are a 4-sided micro bevel and prevent chipping at the edges while defining the edge of each board. This environmentally friendly hardwood leaves a smaller carbon footprint on the planet due to less waste & less use of domestic trees in the creation of this floor. This is a very thick engineered hardwood and may be sanded and recoated many times over the life of this floor and will last many years. This product is only available in 3” widths for both the Oaks & Brazilian cherry floor. This product can be easily installed either by Glue, Nail or Staple down. The Brazilian Cherry is Lacey Act Compliant being harvested from forests that are used solely for hardwood flooring purposes.
Many homeowners today still prefer the use of hardwood flooring because it only takes minimal effort to care for them and to maintain the cleanliness. If you compare hardwood from that of the engineered wood, hard wood is still preferred because they can be refinished many times. In the long run, the value of hardwood can also increase. In order to maintain the life and beauty of hardwood, an ongoing care should be maintained. In our effort to maintain the house floor that is made of hardwood, homeowners must be cleaned, repaired, refinished and protected all the time. Since more and more households are having interests in having hardwood floorings, the Internet can provide you with so many ideas on how to find the right company that is experienced and have an efficient craftsmanship when it comes to this. For example, if you are a home owner and you are in the state of Idaho, you can try to search keywords like Sun Valley Hardwood Flooring, Ketchum Hardwood Flooring, Twin Falls Hardwood Flooring, Elko Hardwood Flooring, and Twin Falls Flooring. To make your search more detailed, you can specify places.
Another force to reckon with in the prefinished hardwood line is the Hampton Series. The Hampton Solid Hardwood Flooring line features 3/4” Thick 6 – sided sealed Oak flooring that has square edged & ends just like a floor that is laid in unfinished than site finished. The 6 sided seal improves the moisture resistance in this flooring product dramatically and achieves the best square edge product on the market today. The Hampton series is available in 5 colors: Natural, Saddle, White Oak Natural, Honey & Gunstock. The color choices for the Hampton series are based off of the top 5 colors selling in the country today by designers & builders. The Six Sided seal is a feature ONLY available in the Hampton series anywhere in the world and is provided by Ten Oaks of Virginia. The finish on this hardwood product is a UV Cured urethane as well as aluminum oxide on the top of the product, and is pre-sealed on all six sides. The Hampton Series is a green product that is produced from Appalachian Oak and can be sanded & finished for a lifetime. The Hampton Series like the rest of the Impressions hardwood flooring line features a 50 year warranty for finish and a lifetime structural warranty. The Hampton Series is produced by a AHMI Member which is a sustainable hardwood forest product. This product is available in a 2 ” & 3 ” wide product.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.