By Curtice Marteau. Hardwood Flooring. Published at Saturday, May 11th, 2019 - 23:16:32 PM.
Often referred to as wood laminate flooring, engineered wood floors are readily available in a variety of specifications, each designed to coincide with a particular room of the home. Considered to be stronger than natural wood flooring, engineered wood floors offer the homeowner the option of installation directly over concrete where natural wood flooring is not recommended. With the multiple layers of engineered hardwood pressed and glued together in opposite directions, under extreme pressures, the dimensional stability of engineered wood floors is a superior product for installation on un-even floors, transferring a dull and inefficient room into a room with charm and character.
What is the average length of the flooring boards? The question of the average board lengths is one that is not commonly asked when it comes to hardwood flooring. It is something not a lot of people think about until it is brought up. The longer the average length of the floor the better the floor looks especially in large rooms. One foot and two foot lengths produce a very choppy and unattractive floor. The box size is not the only way to tell what the average length is; you can have an 8' box with all short pieces in it. Many offshore manufactured products are in four foot boxes with will definitely ensure you are getting a floor with very short lengths. It is not only offshore products that have short lengths but many North American made products as well. One very high end Canadian manufacturer has an average length of 27-29” in their 3-1/4” Select and Better Red Oak.
Installing Bruce hardwood flooring on the floors of your home is one of the best investments that you can ever make. It will add to the ambiance of any room and increase the value of your home if you ever want to sell. Each grade of wood used in Bruce hardwood carries a warranty all its own. Choose from three grades of hardwood – Good, Better and Best – to have hardwood floors with knots and character. The Best grade in Bruce hardwood flooring is the most expensive, but it also has the best quality wood and the best warranty.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.