By Davet Garnier. Hardwood Flooring. Published at Thursday, May 16th, 2019 - 05:46:40 AM.
The cost of hardwood flooring is usually higher if you source them from home improvement establishments and local dealers. The latter has the advantage of possible price negotiations and typically offering free samples. Liquidators and flooring wholesalers both offer competitive prices. However, the latter's supply of hardwood flooring cannot be guaranteed and no warranty is usually offered. Floorboard wholesalers offer hardwood flooring at more affordable rates and are more reliable stocked. Furthermore, most will ship free samples to prospective buyers. Make sure to compare suppliers to be able to get the best deal possible.
This kind of flooring is installed by nailing it to a subfloor of plywood or OSB. Natural hardwood floors are finished in place by sanding the boards to a uniform thickness and coating them with a sealer. When the sealer wears off and the surface darkens, the floor can be sanded and refinished, usually from 5-7 times, or until a nail becomes visible. The life expectancy of natural 3/4 hardwood flooring is about 100 years. Installing natural hardwood flooring is labor intensive and time consuming. Laying down, sanding and sealing a hardwood floor usually takes several days. Installation time can be reduced with pre-finished hardwood flooring which eliminates the application and drying time of the finish and sealer. Pre-finished flooring is usually more wear resistant because the manufacturer can apply more durable coatings in a controlled factory environment. Homeowners should also consider that on site finishing will emit noxious VOCs into the house environment.
Although it is not recommended, you can have Bruce hardwood flooring in the bathroom of your home. This is because hardwood is not conducive to areas of the home where there is excessive moisture. The choice to use unfinished or prefinished Bruce wood flooring is a matter of personal taste. It depends on how much work you want to do to finish the floor yourself or how much time you want to spend on maintenance of the Bruce hardwood floors. There are advantages and disadvantages to both, so you can ask the Bruce experts for advice when you are selecting your hardwood flooring. Prefinished hardwood does have more advantages, such as longer finish warranties, uniform stain application in a factory setting and it is easier to keep clean.
What is the waste factor of the flooring? The waste factor of the flooring is an important issue as well. If 10-15% waste is what is suggested by the manufacturer than that means you will have to buy that much more to get enough to install your entire floor. The higher the recommended waste factor the lower quality the product. You may find when comparing products for price on may be more than the other but you must factor in the difference in waste to the price. A floor for $6 with 3% waste would cost you $6.18 which would be the same cost as a floor with 10% waste that is $5.62 and the product with 3% waste would definitely be a higher quality product. The bottom line is you shouldn't have to sort the waste out of the boxes; the manufacturers should be taking the waste out at the plant so you are only getting good quality pieces you can install in your floor.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.