Published at Friday, May 24th, 2019 - 03:31:15 AM. Ceramic Tile. By Charlot Lefranc.
After having applied the adhesives, carefully place the tiles one by one on the surface. Equipments such as tile spacers can be used to give adequate space between the tiles. Sometimes, for fixing tiles on the edges cutting may be required. A masonry drill can be used for the cutting purposes. For making curved cuts, micro cutter or wet saw can be used. Before allowing the tiles to settle, they should be leveled using a hammer. When tiles are settled, fill in the gap between the tiles with grout. Seal all grout joint to avoid grout porosity. The final step in ceramic tile installation process is caulking. This is primarily done to prevent water from seeping into bathtub edges or corners of the wall.
Keep Your Tools Ready – The first thing to do is to make sure that the tools you will use are ready at hand. These tools should include basic carpentry tools like an accurate measuring tape, a carpenter's square and a bubble level. You should also be prepared with the tiles and all you need to space them and put them together: tile spaces, a tile cutter, a trowel, and a putty knife. Then you must get your adhesives ready: tile bonding material, thin set mortar or tile adhesive, the sealant, the grout and a rubber grout float. Also you must make sure that you are wearing work clothes or overalls, glasses and heavy-duty gloves for safety.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.