By Alisanne Gicquel. Hardwood Flooring. Published at Wednesday, May 15th, 2019 - 10:17:15 AM.
”Solid” hardwood flooring is traditionally cut from a log in an unfinished plank form with tongue and groove milled on all sides. Ranging from 5/16” to ¾” in thickness, ”solid” floors are typically available in various widths and lengths. Due to the sensitivity of natural ”solid” hardwood from humidity and moisture, natural solid wood floors are normally installed at or above ground level. The natural beauty of wood grains found in solid hardwoods is both appealing and alluring with finishes that may be completed upon installation in the home or factory finished with a pre-determined choice of unlimited finishes to select from. ”Solid” hardwood flooring is as one may expect the most expensive of all wood floor selections. It is not uncommon for ”solid” hardwood floors to exceed two to three times the cost over other floor selections and in most cases is out of reach of those on restricted budget guidelines. Available in a variety of North American wood species, ”solid” hardwood floors are noted for durability and overall beauty that will last a lifetime.
Many homeowners today still prefer the use of hardwood flooring because it only takes minimal effort to care for them and to maintain the cleanliness. If you compare hardwood from that of the engineered wood, hard wood is still preferred because they can be refinished many times. In the long run, the value of hardwood can also increase. In order to maintain the life and beauty of hardwood, an ongoing care should be maintained. In our effort to maintain the house floor that is made of hardwood, homeowners must be cleaned, repaired, refinished and protected all the time. Since more and more households are having interests in having hardwood floorings, the Internet can provide you with so many ideas on how to find the right company that is experienced and have an efficient craftsmanship when it comes to this. For example, if you are a home owner and you are in the state of Idaho, you can try to search keywords like Sun Valley Hardwood Flooring, Ketchum Hardwood Flooring, Twin Falls Hardwood Flooring, Elko Hardwood Flooring, and Twin Falls Flooring. To make your search more detailed, you can specify places.
The most prominent element that makes hardwood become unclean is dirt and grit. If these elements are not properly removed, they can cause scratch or marks on your flooring. To clean your hardwood flooring is as easy as sweeping and dusting or a regular basis. Daily sweeping is not also advisable because they can cause damage to the hardwood. To sweep the floor at least once a week is the best thing that can be done except of course when there are especial occasions that need proper cleaning. It is better to use vacuum cleaners compared to sweeping and scrubbing. If the flooring that you have in your home is made with shining or glossy finish, you can use a damp mop because the hardwood is protected with either oil or wax. When using a damp mop, make sure that there is no water spills being drifted on the floor. Some people also make use of neutral pH hardwood floor cleaner while cleaning or mopping the floor.
What does the supplier recommend for acclimation? I know you must have heard someone say ”the flooring must sit in your home for two weeks prior to installation”. This is a very general statement and in most cases will do more harm than good for your hardwood floor. If you did this in a new home and it sat in the home while they were drywalling, painting, the wood would be so damp by the time you installed it that you would just be asking for trouble. The fact is a new home will have 1000 to 2000 gallons of water that will be oozing out of the home the first two years. If your flooring is sitting in the home before it is installed it will absorb all of that moisture. If you are having the flooring sit in your home you will want to make sure it is stored in normal living conditions to avoid it from drying out too much or picking up too much moisture. In some cases, a seasonal dwelling, you may want to have the hardwood flooring absorb the moisture before it is installed. If the home is always a high humidity environment then you want the wood to pick up moisture so it can be normal living conditions for that particular environment. You want to have a hygrometer to measure the humidity in your home before the installation and monitor your humidity after to ensure your home is in the proper humidity range to avoid issues with your flooring.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.