By Derrell Coste. Hardwood Flooring. Published at Saturday, May 18th, 2019 - 07:31:28 AM.
Because wood wicks water, as soon as you create a dry spot, the dry spot will start to pull in moisture from the wet wood around it. This greatly increases the rate of drying the floor over not moving the fans around. Many hardwood floors are installed on a ”bed” that creates an air gap under the wood slats. If this is the case for your floors, try to create a funnel with a piece of plastic or canvas and force air underneath the floors along any cracks you can find. Use duct tape to tape the funnel to the fan, and an office stapler to staple it over the crack you want to dry out. Take your time, failure to let the floors dry completely out will set up conditions for mold to grow.
What does the stain/finish look like? Many large manufactures will finish all different woods at the same time without making adjustments for each wood because each time they make adjustments it effects the production. The fact is, each wood needs to be finished differently to achieve the nicest stain/finish. Oak requires more finish to ”fill in” the grain or else it will appear very pitted which is not something desirable in an oak floor. You want to be able to hold a piece up to the light and see a perfect smooth finish. Maple requires more brushing than oak so the stain can penetrate into the wood and not appear ”blotchy”. Maple is a beautiful wood and with the proper staining you can really bring out features such as Birdseye and tiger tail. If not stained properly these features are hidden.
To date, there are two basic types of hardwood flooring, solid wood and engineered wood. With many variations of engineered wood floors available, choosing the correct wood floor can be at best, confusing and frustrating. Whereas the terminology associated with ”hardwood”, often results in purchasing a floor that does not fit allotted budget guidelines or installation limitations to which the floor is intended, not all hardwood floors are in-fact; ”natural hardwood”. Purchasing and installation of a wood floor not designed for a specific purpose will often lead to replacement and loss of expenditures of funds previously applied.
How durable is the finish? Durability is probably the most important things to consider when purchasing a prefinished hardwood floor. The finish is what you are actually walking on and must be very durable to have a beautiful lasting floor for years to come. Many imported prefinished floors have very little durability and the finish can be taken off with a few swipes of 150 grit sandpaper. When buying hardwood there are a few ways to test the finish: one would be to take 150 grit sandpaper and rub the finish to see if the finish will come off and two would be to firmly press the edge of a coin against the finish, a quality finish will dent but not come off. Quality manufacturers will have aluminum oxide or better yet titanium oxide hardeners in the finish. Many offshore manufactured products will say they have aluminum oxide in them but actually do not. To test if a hardwood floor has aluminum oxide in the finish simply put the sample in your microwave and if it sparks, it does indeed have aluminum oxide in the finish. I know that may seem a little strange but it's something worth checking because hardwood flooring is a big investment and you want to know the durability of the finish.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.