Published at Tuesday, May 14th, 2019 - 13:31:30 PM. Ceramic Tile. By Dior Veron.
The first step in the removal of ceramic tile is to take out the trim covering the edges of the tiles. Next, scrape out the grout found on the perimeter of the tiles. Caulking on the vertical corners should also be properly scraped out. For removing these elements, equipments such as sharp utility knife, razor blade, and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk, tapping can be done on the tiles to check whether any of the tiles is loose.
The kind of ornamentation of the ceramic tile is important too. For a ceramic countertop or tabletop, the tiles should be flat. For a backsplash the tiles can have low relief but high relief will be difficult to clean and is not generally advised. Fireplaces, murals, mosaics and facades can be either flat, have low relief or high relief and low fire glazes are OK in these applications. Be careful though with areas that will get much use, such as around a fireplace where logs will be placed or fireplace tools will be used. Low fire tiles and glazes can crack or chip much more easily than stoneware and high fire glazes. Also, if it is an area that will require frequent cleaning, high relief may prove troublesome.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.