By Carola Hamon. Hardwood Flooring. Published at Saturday, May 18th, 2019 - 00:41:22 AM.
In many homes in Houston, hardwood floors are one of the most beautiful focal points in the home. They come from a wide variety of woods and can be finished in just about any color and finish you can imagine. While hardwood floors are very durable and traffic resistant, proper care and maintenance is essential to keeping them beautiful for many, many years. The key to keeping hardwood floors looking beautiful lies with keeping them as clean and dry as possible. Dust and other debris on the surface of hardwood flooring gets ground into the finish, and this causes floors to dull over time. The longer this surface contamination is left on the floor, the more deeply embedded the debris becomes and this causes more damage to the finish. If not attended to, this can actually strip away the finish and leave raw wood exposed. Keeping a good coat of wax on the floors will prevent casual spills from absorbing into the wood if you act quickly clean them up. The good news is that keeping your floors clean is a simple matter of sweeping them a couple of times a day with a swifter mop (use a micro fiber pad) and a product like Orange-Glo.
Engineered Hardwood Floors – Engineered hardwood floors are a laminate built from multiple ply layers with a thick hardwood veneer wear layer on top. The veneer layer is available in almost any exotic hardwood species with exotic color and grain patterns. Engineered hardwood floors are more resistant to moisture than natural wood flooring, which adds to their appeal because they can be installed in damp regions of the country and in basements with relatively high humidity levels. Some brands of engineered hardwood floors have a thin wear layer that can be recoated but you cannot sand the floor to stain it or completely refinish it. These less expensive brands have an expected average life span of 30-40 years depending on usage patterns. Other brands and styles have much thicker wear layers (5/32 inches) that can be sanded and refinished up to as many as 5 times with an average expected life span of from 60-80 years. Thicker wear layers are sawn from the log whereas thinner layers are scraped or sliced. High tech glue is the bonding agent.
The final product in the Impressions hardwood flooring line is the 3/4” thick solid hardwood floor Classic Series. The Classic Series features a Hand-scraped surface and 3 colors of oaks to choose from. The Wheat Color available in this line is an extremely popular color that is a light coloring over natural and pulls on neutral tones to look great in any room. This product is 3/4” Thick solid hardwood floor and 5” wide with all 4 sides beveled to define the board. The Classic series features a Vintage Grade white oak hardwood custom selected to reflect the old world look and rustic styling. The Classic series carries a 50 year finish warranty & lifetime structural warranty and can be installed on or above grade. Each plank in this collection is hand crafted individually and is plantation grown making this a green hardwood flooring product. The finish on this product is a water based finish called Perma-Finish, which is a commercial grade finish that shows the grain in the hardwood underneath with more vivid coloring and when scratched doesn't show coloring from the finish. This product is milled from 1 foot to 7 foot lengths with an average board length in the 4 foot range, making this a long board product that is great for large expanses.
In a home with shabby hardwood floors, the biggest improvement you can make is to refinish the floors. Begin by making any necessary repairs, and then removing all the furniture and drapes and sealing the vents and registers in the room so that you won't spread dust throughout the house. Sanding floors is easiest to do with a drum sander and an edging machine for the sides and corners of the room. You can rent these machines, and it is a good idea to rent a buffer or floor polisher at the same time. Plan to make three passes with your sanding equipment, using increasingly finer sandpaper each time. Vacuum carefully and pick up every bit of fine dust and grit with tacking cloths. All dust and dirt must be removed. You can now apply a stain if you wish or you can leave the natural color and design of the wood – such as the popular oak, maple, or cherry – to be displayed. Polish and clean the dust and dirt from the floor again, and then apply your sealer – a polyurethane or a water-based urethane that provides a protective barrier, or oil and wax, which penetrates the wood and protects from within. Carefully read all the information accompanying each product, follow the safety advice, and apply as many coats of stain or sealer as suggested by the manufacturer of the products you are using.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.