Published at Saturday, May 25th, 2019 - 03:29:24 AM. Ceramic Tile. By Bernadette Pelissier.
The first step in the removal of ceramic tile is to take out the trim covering the edges of the tiles. Next, scrape out the grout found on the perimeter of the tiles. Caulking on the vertical corners should also be properly scraped out. For removing these elements, equipments such as sharp utility knife, razor blade, and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk, tapping can be done on the tiles to check whether any of the tiles is loose.
Do not spread too much mortar at once. If the mortar dries before you can set the tile, you'll have the additional problem of removing it. When you set the tile, only a light pressure is required. Depending on the thickness of your tile, you'll have to press it into the mortar a short distance. Make sure that each tile is even with the next. Mortar will come up over the sides of the tile, but this can easily be wiped away. Avoid resting hands or arms on the tile you've set. It's going to take a couple of hours before the mortar is completely dry. Grout the ceramic tile flooring, and wipe off any grout that gets on the tile.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.