Published at Saturday, May 25th, 2019 - 05:33:16 AM. Ceramic Tile. By Louvel Charlot.
Prepare the Sub-Floor for the Tiling Process – After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Once you have your tile, you can pre-cut tiles that will be placed at the edges of the floor if the tile is too large. This means you should do some measuring first. You can also cut the tile while you're laying it, but then you have to be sure you haven't laid down the mortar until you've made the necessary cuts. Mortar that is only partially dried might not bond with the tile when you set it. You can use a wet ceramic saw or a utility knife to do the cutting. Which you use depends on the thickness of your ceramic tile flooring. To set your ceramic tile flooring, you'll also need mortar and grout. These are easily purchased at any hardware or home improvement store. You'll also need a wet tile saw to cut tile, when required, and a trowel to spread the mortar or adhesive in which you set the tile. You can also use spacers which separate the tiles from each other in an even manner.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.