Published at Saturday, May 25th, 2019 - 06:29:55 AM. Ceramic Tile. By Berangaria Rougier.
Though installation of ceramic tile is not a complicated task, it does involve some detailed steps such as preparing tile surface, laying out the wall, applying adhesive or mortar, setting tile, and caulking. Ceramic tile can be installed on any surface such as drywall, plaster, cement block, and even in existing ceramic tile. The surface for the tiles should be flat, smooth, and free of dust and debris. Additionally, if there is any loose paint or crack on the surface, it should be scraped off and patched with some water-proof substance. Laying out the wall is perhaps the most important step in the installation process. It includes determining the level line, planning starting point, and checking whether any irregularity has been caused by fixtures like kitchen cabinets and tubs. The next step is to evenly apply ceramic wall adhesive on the surface using a notch trowel. Pro-mastic and pro-flex platinum are the most commonly used adhesives for ceramic tiles.
Do not spread too much mortar at once. If the mortar dries before you can set the tile, you'll have the additional problem of removing it. When you set the tile, only a light pressure is required. Depending on the thickness of your tile, you'll have to press it into the mortar a short distance. Make sure that each tile is even with the next. Mortar will come up over the sides of the tile, but this can easily be wiped away. Avoid resting hands or arms on the tile you've set. It's going to take a couple of hours before the mortar is completely dry. Grout the ceramic tile flooring, and wipe off any grout that gets on the tile.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.