By Darrell Duprat. Hardwood Flooring. Published at Tuesday, May 21st, 2019 - 19:39:36 PM.
Choosing the correct hardwood floor wax is best determined by the composition of the hardwood material installed. Using an unapproved wax with harsh cleaners creates counter- productive results damaging hardwood flooring material surfaces, of which may become permanent. All floor waxes and cleaners are not designed for all wood floors. New wood floors are often sealed with urethane, polyurethane or polyacrylic sealers designed to protect the top finished surface. Application of an inappropriate or unapproved hardwood wax/cleaner combination will damage the manufacturer applied sealer dulling the luster, leaving steaks that are clearly noticeable. Seek out professional experienced advice when selecting a hardwood floor wax and cleaner designed to protect and beautify the particular hardwood material installed prior to application of any such substance.
When a more in-depth cleaning is required, use a cleaning method appropriate to the finish on your floor. If your floor has a glossy finish, it means that polyurethane, or a water-based urethane, or a similar finish has been used to form a protective barrier over the hardwood. If it has a matte finish, it means that the floor is protected with a penetrating seal of oil and/or wax. On neither of these finishes is water an acceptable cleaning agent, but both of them can accept a surface, damp-mop cleaning, which means the mop is not wet but only damp to the touch. You are cleaning only the surface and not using enough water to penetrate even the oiled-and-waxed hardwood. When using a damp mop on oil and waxed hardwood, you can add a little neutral ph hardwood floor cleaner to the water before dipping the mop into it. A floor with a protective glossy barrier can accept a generic hardwood floor cleaner providing it doesn't contain any wax or oil.
Installation Advantages – One other advantage of engineered hardwood floors is that a floating install can be applied directly over vinyl or a concrete slab or any other existing material that is hard and level without the expense and necessity of a subfloor. Manufacturers recommend that a 4-6 mil vapor barrier be installed over the under-surface if moisture is likely to be a problem. Durable Coatings – Traditional finishing products are used on engineered hardwood floors, but other finishes are available that are much more durable than the products available for site application. Quality manufacturers apply 7-10 coats of aluminum oxide crystals or diamond dust to make the engineered hardwood finish harder than anything that could be applied on site or even purchased in a Home Depot. Engineered hardwood floors come with as much as a 25-year warranty.
Stains – Asian walnut hardwood usually comes stained in three different colors. Natural pertains to wood that has only been given a clear, protective finish in order for the natural color to be appreciated. This can range from a light shade to the more common darker hues. Cinnamon-stained, otherwise known as cherry-stained, Asian walnut hardwood boards have a vibrant, reddish hue. On the other hand, smoke- or toffee-stained hardwood has a slightly darker hue similar to the natural color of the black walnut wood. Because of this, Asian walnut hardwood is often used as an alternative since it is relatively more affordable than its cousin.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.