Published at Wednesday, May 22nd, 2019 - 12:41:08 PM. Hardwood Flooring. By Forrest Payen.
For most people the number one concern for flooring isn't the price of purchase but more about the cost of its maintenance. The cost of preserving a solid floor over engineered hardwood flooring equates to a combination of time, labor and money. Solid hardwood flooring needs special care to keep their luster and appearance. Natural wood scratches, fades with age and is prone to warping and even mold should it be exposed to water and moisture for extended periods. After a few years, when the natural wood has weathered a bit, it will be necessary to have the floors resurfaced. This usually involves sanding the wood surface and then re-staining. Unfortunately natural solid wood floors, because of environmental regulations, can't be layered with a coat of polyurethane which could protect it from scratches. Engineered floors is pre-coated which makes it more resistant to scratches and provides for greater longevity. Because engineered flooring is still made with real natural wood, it can be resurfaced if it becomes deeply scratched and its' construction allows it to be used in more highly trafficked areas that may be susceptible to moisture and heat like the kitchen or bathroom. Unlike natural hardwood, engineered flooring would warp or cup when exposed to these elements. This type of flooring is constructed so that their inner core is laid in opposite directions making it immune to atmospheric assaults that would normally cause it to enlarge or shrink creating all kinds of problems.
In order for the investment in new hardwood floors to last a lifetime, it is crucial to understand the differences in solid and engineered hardwood flooring. Several factors must be considered to select the best option for each unique situation. Homeowners can feel good about choosing their hardwood flooring if they learn a few basics first. Solid Hardwood Flooring – Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home's decor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.