Published at Saturday, May 25th, 2019 - 03:28:49 AM. Ceramic Tile. By Margot Auge.
Though installation of ceramic tile is not a complicated task, it does involve some detailed steps such as preparing tile surface, laying out the wall, applying adhesive or mortar, setting tile, and caulking. Ceramic tile can be installed on any surface such as drywall, plaster, cement block, and even in existing ceramic tile. The surface for the tiles should be flat, smooth, and free of dust and debris. Additionally, if there is any loose paint or crack on the surface, it should be scraped off and patched with some water-proof substance. Laying out the wall is perhaps the most important step in the installation process. It includes determining the level line, planning starting point, and checking whether any irregularity has been caused by fixtures like kitchen cabinets and tubs. The next step is to evenly apply ceramic wall adhesive on the surface using a notch trowel. Pro-mastic and pro-flex platinum are the most commonly used adhesives for ceramic tiles.
After having applied the adhesives, carefully place the tiles one by one on the surface. Equipments such as tile spacers can be used to give adequate space between the tiles. Sometimes, for fixing tiles on the edges cutting may be required. A masonry drill can be used for the cutting purposes. For making curved cuts, micro cutter or wet saw can be used. Before allowing the tiles to settle, they should be leveled using a hammer. When tiles are settled, fill in the gap between the tiles with grout. Seal all grout joint to avoid grout porosity. The final step in ceramic tile installation process is caulking. This is primarily done to prevent water from seeping into bathtub edges or corners of the wall.
Any content, trademark’s, or other material that might be found on the Familyhealthcareus website that is not Familyhealthcareus’s property remains the copyright of its respective owner/s. In no way does Familyhealthcareus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.